Booting daily-live/current cosmic-desktop-amd64.iso from Grub2 and updating it using zsync.

Today I downloaded Ubuntu 1810 Cosmic Cuttlefish Live ISO

    wget -c http://cdimage.ubuntu.com/daily-live/current/cosmic-desktop-amd64.iso


 and used it booting from Grub2 menu entry as follows:

    sudo gedit /etc/grub.d/40_custom

and added the following lines:

    menuentry "Cosmic Desktop iso" {
            set isofile="/home/user/cosmic-desktop-amd64.iso"
            loopback loop (hd0,X)$isofile
            linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile noprompt noeject
            initrd (loop)/casper/initrd
    }

then I updated grub to add the menuentry:

    sudo update-grub

I could boot from the ISO selecting Cosmic Desktop iso from menu.

Today I decided to keep the ISO updated and installed zsync and used it to update.

    sudo apt-get install zsync -y
    zsync http://cdimage.ubuntu.com/daily-live/current/cosmic-desktop-amd64.iso.zsync
    #################### 100.0% 108.2 kBps DONE  

    reading seed file wily-desktop-amd64.iso: **************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************Read wily-desktop-amd64.iso. Target 100.0% complete.   
    verifying download...checksum matches OK
    used 1257062400 local, fetched 0

Since it is less than 24 hours it says " fetched 0"

If you want to use the method please note that the ISO is on /home folder of the user. Put your username replacing user and X in (hd0,X) as your partition no X.

Booting daily-live/current wily-desktop-amd64.iso from Grub2 and updating it using zsync.

Yesterday I downloaded Ubuntu 15.10 Wily Werewolf Live ISO

wget -c http://cdimage.ubuntu.com/daily-live/current/wily-desktop-amd64.iso

 and used it booting from Grub2 menu entry as follows:

sudo gedit /etc/grub.d/40_custom

and added the following lines:

menuentry "Wily Desktop iso" {
        set isofile="/home/user/wily-desktop-amd64.iso"
        loopback loop (hd0,X)$isofile
        linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile noprompt noeject
        initrd (loop)/casper/initrd.lz
}

then I updated grub to add the menuentry:

sudo update-grub

I could boot from the ISO and found that Wily has Linux Kernel 4.2 which has Blue tooth driver for my Laptop and it worked well.

Today I decided to keep the ISO updated and installed zsync and used it to update.

sudo apt-get install zsync -y
zsync http://cdimage.ubuntu.com/daily-live/current/wily-desktop-amd64.iso.zsync
#################### 100.0% 108.2 kBps DONE   

reading seed file wily-desktop-amd64.iso: **************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************Read wily-desktop-amd64.iso. Target 100.0% complete.    
verifying download...checksum matches OK
used 1257062400 local, fetched 0

Since it is less than 24 hours it says " fetched 0"

If you want to use the method please note that the ISO is on /home folder of the user. Put your username replacing user and X in (hd0,X) as your partition no X.

How to run Debian with secure boot on.

I am having Lenovo G50-45 Laptop which had Windows 8.1 pre installed and I have installed Ubuntu 14.04 and 15.04 in triple boot with secure boot on.

Today I installed Debian 8.1 on another partition. For installing Debian I had to disable secure boot. After installation if I was booting Debian through its Boot Loader I had to disable the secure boot.

Later on I enabled secure boot and using Ubuntu 15.04 and updated the kernel. After update the grub got updated and it picked up the entry of Debian.

Now I could boot Debian through Ubuntu's Boot Loader without disabling secure boot.

NB: For those who are not familiar with UEFI. Each operating system has its own Boot Loader with entries of other operating systems in the Grub Menu.

How to recover lost Grub Menu and Edit Menu entries.

Yesterday I installed Ubuntu 15.04 on USB stick and selected grub install on the USB to keep the Grub on Hard Disk intact. Even then I lost the Grub Menu on the Hard Disk and had to use the grub on the USB to boot into Ubuntu 14.04.2 installed on the hard disk.

For recovering Grub of menu I had to install Boot Repair through the ppa. After running Recommended Repair through Boot Repair I got the Grub Menu on the hard disk but with many unnecessary entries.

For removing the unwanted entries on Grub Menu I installed Grub Customizer and used it to remove the entries.

Boot Repair and Grub Customizer are excellent tools.

Sidux with XFCE.

I had tried KDE version of Sidux earlier in May 09 and wrote about it in this post. I decided to try XFCE version this time and downloaded the latest iso. As before I wanted to boot from iso without burning a CD. Now I have grub2, therefore, I opened /etc/grub.d/40_custom to edit and wrote the following lines in it:

menuentry "sidux 32bit from ISO" {

set root=(hd0,4)

linux /sidux/vmlinuz boot=fll quiet vga=791 fromiso=/sidux/sidux.iso persist tz=Asia/Calcutta

initrd /sidux/initrd.img

}

First I copied the iso to 'sidux' directory at the root of sda4 partition (mounted at /media/disk)

sudo cp sidux-2009-03-momos-xfce-i386-200911110039.iso /media/disk/sidux/sidux.iso

Then I mounted the downloaded iso and copied vmlinuz and initrd.img to 'sidux' directory at the root of sda4 partition (mounted at /media/disk):

mkdir /tmp/sidux

sudo mount sidux-2009-03-momos-xfce-i386-200911110039.iso -o loop /tmp/sidux

cd /tmp/sidux/boot

sudo cp vmlinuz* /media/disk/sidux/vmlinuz

sudo cp initrd.img* /media/disk/sidux/initrd.img

Then I updated grub to get the sidux entry in grub menu:

sudo update-grub

Then I restarted and selected 'sidux 32bit from ISO' entry in Grub menu and I could boot into the XFCE Desktop on latest Sidux.

There was a freeze after some time because of the bug in Xorg for Intel 80845 chip-set.
I had faced same problem on Ubuntu Karmic on this chip-set and forced Xorg to use vesa driver by writing xorg.conf. I copied the file to /fll/cow/etc/X11 on sda4:

Section "Monitor"
    Identifier    "Configured Monitor"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Monitor        "Configured Monitor"
    Device        "Configured Video Device"
EndSection

Section "Device"
    Identifier    "Configured Video Device"
    Driver        "vesa"
EndSection

How to boot Ubuntu from Desktop iso.

I have been trying various Linux distributions by copying the contents of Live CD ISO to a spare partition, editing menu.lst file of Grub for suitable entries and booting the operating system. This method saves a CD.

Grub2 is the default boot-loader on Ubuntu 9.10 Karnic for previous distributions you have to install it.

To install Grub2:
$ sudo apt-get install grub-pc
This will install Grub2 but does not replace Grub Legacy and puts an entry in /boot/grub/menu.lst to Chainload and try it. After you find that it is working you need to replace Grub Legacy by Grub2:
$ sudo upgrade-from-grub-legacy

I installed Grub2 recently and discovered that it can directly boot from ISO. I had Ubuntu 9.10 Desktop CD ISO to try. Instead of copying the contents of the ISO I copied the ISO in my-ISO folder on one partition (sda4). Then added following entry in the file /etc/grub.d/40_custom
menuentry "Karmic Live CD (sda4)" {
loopback loop (hd0,4)/my-ISO/ubuntu-9.10-desktop-i386.iso
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/my-ISO/ubuntu-9.10-desktop-i386.iso
initrd (loop)/casper/initrd.lz
}

Then I updated Grub2:
$ sudo update-grub

The update copied the above menu entry from /etc/grub.d/40_custom to /boot/grub/grub.cfg (Please note that you are not supposed to edit grub.cfg directly).

On reboot I selected the new menu entry "Karmic Live CD (sda4)" and could boot from the ISO.

Please note that on Grub2 sda4 is represented by  (hd0,4) and not  (hd0,3) like in Grub Legacy.